Filter
Top Products
144 DB2 Manager User Guide
StorageTek Proprietary
Explanation: All sub-tasks of the type identified in the message have been
successfully initialized during start-up of the DB2 Manager control
region. ‘nnn’ gives the number of sub-tasks initialized.
Action: None. This is an informational message.
OTD20016 OTDBP300 is not in Link Pack Area
Explanation: The DB2 Manager row edit routine OTDBP300 was not found in the
FLPA or MLPA during control region initialization processing. The
control region is terminated.
Action: Ensure that module OTDBP300 is installed in the FLPA or MLPA
before restarting the control region (see “Perform MVS host system
modifications” on page21 for a discussion of this requirement).
OTD20017 Intercept successfully established
Explanation: The Archive Manager /DB2 row edit routine OTDBP300 has been
located in the FLPA or MLPA, and has been successfully initialized.
Action: None. This is an informational message.
OTD20018 ENQueue Error: Major: mmmmmmmm Minor: nnnnnnnnnnnnnnnn
Return code=X'xx'
Explanation: An error has been received attempting to enqueue on the resource
whose major and minor names are identified in the message. ‘xx’ is
the return code received from the ENQ macro.
Action: Refer to IBM documentation on ENQ macro processing for a
description of the return code. Take the appropriate corrective action
and re-start the control region. If no apparent cause for the error can
be detected, contact your DB2 Manager product support
representative.