Filter
Top Products
DB2 Manager User Guide 29
StorageTek Proprietary
OTSN4301 Lifecycle Director Enter values
Archive Manager V2.6
Storage Level Definition
COMMAND ===>
-------------------------------------------------------------------------------
Primary index name ===> OTDB.V1R1.TEST.INDEX
Storage level ===> 0
More: +
Database blocksize ===>
Maximum blockcount per volume ===>
Unit name for scratch allocn: A ===> B ===>
C ===> D ===>
Tape usage options:
ICRC ===> Retention period ===>
Dynamic load balancing ===> or Expiry date ===>
Volsafe enabled: A ===> B ===>
C ===> D ===>
D/b maintenance options: Duplexing options:
Recycle threshold ===> % Duplex during archival ===>
AUTOUNCAT during recycle ===> Duplex during backup ===>
Disk compress threshold ===> %
Disk copy options:
Unit name ===> Primary alloc ===>
Initial retention ===> days Secondary alloc ===>
Release unused space ===> Dataset blocksize ===>
Pre-fetch retention ===> days Maximum blockcount ===>
Figure 2 - storage level definition panel OTSN4301
4.
Fields on panel OTSN4301 should be entered as follows (see Figure 2):
Database
blocksize
Enter the value ‘32760’.
Unit name for
scratch
allocation
Enter the unit name(s) to be used by Archive
Manager when dynamically allocating primary
and backup copies of new tape datasets in
storage level 0 in this Archive Manager database.
These should be a 1 to 8-character alphanumeric
identifier which identify a valid esoteric unit name
or device address on the host system control
program.
All other fields on this panel are optional. Refer to the Archive Manager
User Manual for a description of these fields and their usage.
After all required entries have been made, press 'ENTER'. When all
entries have been accepted, the primary index Access Method Services
panel OTSN4302 will be displayed to enable customization of the primary