Filter
Top Products
DB2 Manager User Guide 161
StorageTek Proprietary
Explanation: A request by a disk reader task for virtual storage in the DB2 Manager
control region has been rejected by the operating system. Disk reader
task initialization processing is aborted.
Action: Allocate more virtual storage to the control region, by increasing the
value of the SIZE parameter in the DB2 Manager procedure. Restart
the control region.
OTD25405 Disk rdr task nnn initialization failed
Explanation: Initialization of disk reader sub-task ‘nnn’ has failed. Disk reader task
initialization processing will be terminated.
Action: Examine the system log for other messages displayed by the DB2
Manager, giving the cause of tape reader task initialization failure.
Take the appropriate action described for those messages, and retry
the disk reader task initialization request.
OTD25407 Disk rdr task nnn abend Sxxx intercepted
Explanation: A system abend has been intercepted during operation of disk reader
task ‘nnn’. The system abend code is 'xxx'. Disk reader processing
will continue.
Action: A system abend has been trapped during processing of a migrated
row access request. If possible, DB2 Manager will recover from the
abend.
If it is not possible for DB2 Manager to recover from the abend, the
disk reader task will be terminated abnormally.
The problem should be reported to your DB2 Manager product
support representative.
OTD25409 Disk rdr task nnn terminated
Explanation: Disk reader task number ‘nnn’ has terminated processing in response
to an operator command, or following an unrecoverable error
condition.
Action: None. This is an informational message.
OTD25411 Return code xx Supp codes X'xxxxxxxx' received opening | reading |
closing d/b dddd, T=Dnnn
Explanation: An error has been received by disk reader task ‘nnn’ accessing the
Archive Manager database with identifier ‘dddd’, for the type of
processing identified in the message. ‘xx’ gives the return code
received from the Archive Manager call, and ‘yyyy’ and ‘zzzz’ give
supplementary error codes 1 and 2. Processing of the current request
is terminated with an error.