Filter
Top Products
C1307M-C (8/07) 9
3. Attach the base of the system to an Esprit mount (EWM or EPP) with the three flathead 10-32 x 1/2-inch screws and washers (supplied).
Figure 3. Attaching the Base
4. Route the wires and cables through the center of the Esprit mount. Reinstall the transformer module into the base. The transformer module
can be positioned in the mount base in only one orientation.
Figure 4. Routing Wires and Cables
5. 120/230 VAC models only: Set the 120/230 voltage selector switch on the transformer to the appropriate voltage.
6. Connect wires and cables.
a. Connect to AC power. Use the two supplied clamp connectors.
b. Connect the video coaxial cable to the BNC connector.
120/230 VAC 24 VAC
Black wire Input (AC Line) White wire AC HI (HOT)
White wire AC Neutral White wire AC HI (NEUT)
Green wire Ground
MOUNTING
SCREWS
BASE
MOUNT
120/230 VOLTAGE
SELECTOR SWITCH