Filter
Top Products
C1307M-C (8/07) 45
SCAN SPEED
Scan speed controls the movement speed in auto, random, and frame scan modes. You can select from 1 to 40 degrees per second. The default
is 7.
To change the scan speed:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside <Other>. Press the Iris Open button; the menu appears.
3. Position the cursor (>) beside Scan Speed deg/s. Press the Iris Open button; the cursor moves to the right.
4. Move the joystick up or down until the desired Scan Speed setting appears.
5. Do one of the following:
• Select: Press the Iris Open button to select the option.
• Cancel: Press the Iris Close button to leave the setting as is.
NOTE: If you set the speed to a low number, the scan will barely move. If your unit scans slowly, check the scan speed setting.
Temp Units Celsius
Park time minutes 0
Scan Speed deg/s 7
Pattern Length 1.5 min
Spd Profile 90 MPH Wind
<Zone Blank>
<Az/El/Direction>
Exit
Other Menu
<Camera>
<Power Up Mode>
<Limit Stops>
<Other>
<System Information>
<Factory Defaults>
Exit
MAIN MENU