Filter
Top Products
8 C1307M-C (8/07)
Installation
1. When installing the ES30TI Esprit system, allow for sufficient clearance between the top of the unit and overhead obstructions. This will
prevent interference when the enclosure is driven to its maximum elevation of 33 degrees.
NOTE: Do not install the ES30TI behind a window or other glass. Otherwise, the unit will not operate properly.
Figure 1. Esprit ES30TI System Clearances
2. Remove the transformer module from the base of the system by loosening the four Phillips screws and lifting the module.
Figure 2. Removing the Transformer Module
A
B
C
D
16.3 (41.4)
8.5 (21.6)
7.1 (18.0)
4.2 (10.7)
NOTE: VALUES IN
PARENTHESES ARE
CENTIMETERS; ALL
OTHERS ARE INCHES
A
33.0
B
CD
BASE
LOOSEN
PHILLIPS
SCREWS
TRANSFORMER
MODULE