Filter
Top Products
C1307M-C (8/07) 43
RESTORE CAMERA DEFAULTS
Restoring camera defaults returns the settings on the Camera menu and its submenus to their defaults. It does not restore any other settings.
Turning off power does not restore the settings on the Camera menu to their defaults. Camera settings are retained in memory. When the power
is turned back on, the settings will be the same as they were when the power was turned off.
To restore camera defaults:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside <Factory Defaults>. Press the Iris Open button; the menu appears.
3. Position the cursor (>) beside Restore Camera Defaults.
4. Press the Iris Open button to restore camera settings to their factory defaults. The cursor briefly changes to an asterisk (*) while the camera
restores the camera default settings.
WARNING: After restoring camera defaults, you will have to configure all Camera menu settings from their factory defaults.
Reset Camera
Restore Camera Defaults
Restore All Defaults
Exit
Factory Defaults Menu
<Camera>
<Power Up Mode>
<Limit Stops>
<Other>
<System Information>
<Factory Defaults>
Exit
MAIN MENU