Filter
Top Products
48 C1307M-C (8/07)
TEMP UNITS
The Temp Units setting controls how temperature values are displayed. You can select either Celsius or Fahrenheit. The default is Celsius.
To change the temp units setting:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside <Other>. Press the Iris Open button; the menu appears.
3. Position the cursor (>) beside Temp Units. Press the Iris Open button; the cursor moves to the right.
4. Move the joystick up or down to toggle between Celsius and Fahrenheit.
5. Do one of the following:
• Select: Press the Iris Open button to select the option.
• Cancel: Press the Iris Close button to leave the setting as is.
Temp Units Celsius
Park time minutes 0
Scan Speed deg/s 7
Pattern Length 1.5 min
Spd Profile 90 MPH Wind
<Zone Blank>
<Az/El/Direction>
Exit
Other Menu
<Camera>
<Power Up Mode>
<Limit Stops>
<Other>
<System Information>
<Factory Defaults>
Exit
MAIN MENU