Filter
Top Products
36 C1307M-C (8/07)
PATTERN LENGTH
The Esprit can run either of the following:
• One full pattern that is 1.5, 3, or 6 minutes long.
• Two half patterns that are 0.75, 1.5, or 3 minutes long.
This pattern can consist of any standard pan/tilt or lens command. Presets, flip, and turbo are not allowed in a pattern. Zone scan can be enabled
while running a pattern. (For more information about programming patterns, refer to Patterns on page 16.)
To set the pattern length:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside <Other>. Press the Iris Open button; the menu appears.
3. Position the cursor (>) beside Pattern Length. Press the Iris Open button; the cursor moves to the right.
4. Move the joystick up or down to toggle through the number of minutes (1.5, 3, or 6).
5. Do one of the following:
• Select: Press the Iris Open button to select the option.
• Cancel: Press the Iris Close button to leave the setting as is.
CAUTION: If the pattern length is changed, all patterns that were stored are erased.
Temp Units Celsius
Park time minutes 0
Scan Speed deg/s 7
Pattern Length 1.5 min
Spd Profile 90 MPH Wind
<Zone Blank>
<Az/El/Direction>
Exit
Other Menu
<Camera>
<Power Up Mode>
<Limit Stops>
<Other>
<System Information>
<Factory Defaults>
Exit
MAIN MENU