Filter
Top Products
12 C1307M-C (8/07)
TXB Series Translator Board Installation (Optional)
Pelco’s TXB Series allows controllers from other companies to communicate with the Esprit system.
To install a TXB Series board, remove the left cover of the pan/tilt. Once the cover is removed, refer to the manual supplied with the translator
board to complete the installation.
REMOVING THE PAN/TILT COVER
1. Unscrew the Phillips screw located on the left cover of the pan/tilt.
2. Remove cover and place to the side.
Figure 8. Removing the Pan/Tilt Cover
PLUG
PHILLIPS
SCREW