Filter
Top Products
C1307M-C (8/07) 35
PARK TIME MINUTES
Use this feature to park at the preset 1 position after a specific number of minutes of control inactivity. You can set this number from 1 minute to
720 minutes (12 hours), or you can set it to zero to disable this feature. The default is 0 (disabled).
NOTE: You must program Preset 1 for the system to use this feature.
To change the park time:
1. Program preset 95 (28). The main menu appears.
2. Position the cursor (>) beside <Other>. Press the Iris Open button; the menu appears.
3. Position the cursor (>) beside Park Time Minutes. Press the Iris Open button; the cursor moves to the right.
4. Move the joystick up or down to change the park time.
5. Do one of the following:
• Select: Press the Iris Open button to select the option.
• Cancel: Press the Iris Close button to leave the setting as is.
Temp Units Celsius
Park time minutes 0
Scan Speed deg/s 7
Pattern Length 1.5 min
Spd Profile 90 MPH Wind
<Zone Blank>
<Az/El/Direction>
Exit
Other Menu
<Camera>
<Power Up Mode>
<Limit Stops>
<Other>
<System Information>
<Factory Defaults>
Exit
MAIN MENU