Napco Security Technologies GEM-P3200 Home Security System User Manual


 
X GEM-P3200 Programming Instructions
L NAPCO Security Systems
Page 28
WI818G 10/05
GLOBAL SYSTEM EVENT/TROUBLE
SYSTEM RESPONSE
ACTIVATED BY GLOBAL
EVENT/TROUBLE
ADDR
TEST
TIMER
ALARM
SUPERV.
COMM.
BUS 1
MEMORY
FAILURE
LOW
BATTERY
AC FAIL
EZM
TAMPER
SENSOR
WATCH
1 2 3 4 5 6 7 8
Burglary Alarm Output
1082
Pulsed Burg. Output
1083
Fire Output (Lug E9)
1084
Reset Relay
1085
Auxiliary Relay
1086
Report Event Telco 1
1087
Report Restore Telco 1
1088
Report Event Telco 3
1091
Report Restore Telco 3
1092
1. Select the desired option entering the option number (1-8) for each digit.
2. Enter corresponding option number in address location.
NOTE: Dark shaded data value box shows option not available. Press U or D to save.
SYSTEM RESPONSE
ACTIVATED BY GLOBAL
EVENT/TROUBLE
GLOBAL SYSTEM EVENT/TROUBLE
ADDR
TELCO
FAIL
RSRVD.
Telemetry
Trouble
Telemetry
Failure
RSRVD. RSRVD. RSRVD. RSRVD.
1 2 3 4 5 6 7 8
Burglary Alarm Output 1094
Pulsed Burg. Output 1095
Fire Output (Lug E9) 1096
Reset Relay 1097
Auxiliary Relay 1098
Report Event Telco 1 1099
[Default = blank (•) from address 1094-1104] * NOTE: Keypad Aux. is not to be selected for UL Installations.
Report Restore Telco 1 1100
Report Event Telco 3 1103
Report Restore Telco 3 1104
SYSTEM RESPONSE
ACTIVATED BY GLOBAL
EVENT/TROUBLE
GLOBAL SYSTEM EVENT/TROUBLE
ADDR
Digital
Dialer Test
RSRVD. RSRVD.
SERVICE
MESSAGE
PROGRAM
CHANGE
RF RCVR.
TROUBLE
RF
TAMPER
RF
TROUBLE
1 2 3 4 5 6 7 8
Burglary Alarm Output 1106
Pulsed Burg. Output 1107
Fire Output (Lug E9) 1108
Reset Relay 1109
Auxiliary Relay 1110
Report Event Telco 1 1111
[Default = blank (•) blank (•) from address 1106-1116] * NOTE: Keypad Aux. is not to be selected for UL Installations.
Report Restore Telco 1 1112
Report Event Telco 3 1115
Report Restore Telco 3 1116
[Default = blank (•) from address 1082-1092].
GLOBAL SYSTEM TROUBLE REPORTING OPTIONS (ADDRESS 1082-1116)
GLOBAL SYSTEM TROUBLE REPORTING OPTIONS