L NAPCO Security Systems
X GEM-P3200 Programming Instructions
Page 17
WI818G 10/05
DIRECT ADDRESS PROGRAM MODE
advance to the data field.
5. Press
015. The numbers 015 will appear on the keypad display indicating the number of
seconds entered.
6. Press
U to save. Address 2406 is now programmed with a 15-second Abort Delay.
7. Enter another 4-digit address to continue programming or press
C to exit and resume normal keypad
operation.
C) Hexadecimal Format
Data such as Report Codes displays, accepts data by means of a Hexadecimal display. Data is entered directly, by
pressing keys 1 – 9,
G0 for zero, and G 1 through G 5 for hex B through F (11-15), with the
cursor automatically moving to the right upon key press. See table below.
EXAMPLE: HEXADECIMAL Format with the GEM-RP1CAe2/GEM-K1CA: Program an Ambush CS Reporting Code to be
"1B".
DETERMINE THE DATA ENTRIES
Referring to CS REPORTING CODES in the Programming Worksheets that follow, Ambush is located at address
0900. In the "Keypad Reporting Codes" table, the data entries needed to assign a code of "1B" are "
1"
and "
G1".
ENTRY
TOTAL
PRESS
N
KEYPAD
DISPLAYS
ENTRY
TOTAL
PRESS
N
KEYPAD
DISPLAYS
blank
0
•
8
8
8
1
1
1 9
9
9
2
2
2 10
G 0
0
3
3
3 11
G 1
B
4
4
4 12
G 2
C
5
5
5 13
G 3
D
6
6
6 14
G 4
E
7
7
7 15
G 5
F
HEXADECIMAL ENTRIES
DATA ENTRY LOCATION:
Hex Format
• No data yet entered
DATA ENTRY LOCATION:
Hex Format
Press 1G1 in order to set
"Ambush" Reporting code to "1B". The "H"
on the right indicates "Hexadecimal" format.
Address
0900
"Ambush"
0900 - - H 0900 1 B H
Address
0900
"Ambush"
LEFT ADDR RIGHT
1
0900 B
0901
0902
0903
0904
ADDRESS
0900-0904
KEYPAD REPORTING
CODES
Ambush
Panic
Fire
Auxiliary
Tamper