Filter
Top Products
CMOS SETUP
Set the reverse video cursor on the “RUN CMOS SETUP”
using <Up ↑ > and < Down ↓ > and press < ENTER >.
Then
the screen will be replaced by the following.
This screen is the SETUP MENU. This lists the parameters
you can change with the SETUP program. A solid cursor bar
highlights the parameter currently available to be changed. You
can use the following key conventions.
< Enter >
. . . . . . . . . . . . . . . moves the selection bar
< ← > < → >
. . . . . . . . . . . moves the selection bar
< PgUp > < PgDn >
<ESC>
. . . . . . . scrolls allowable settings
. . . . . . . . . . . . . . . . exit and save CMOS
register
< Ctrl > < Alt > < Del >
. . . exit without save
Running the Setup Program
2-7