Note
For instructions on opening the main system unit cabinet,
see the section “Opening and Closing the Case,” later in
this chapter,
System Expansion And Upgrades
This section deals with the addition of expansion boards and
products to your computer’s main system unit. Although most
expansion products are provided with detailed instructions for
their installation and use, it is recommended that you read
through this section in order to familiarize yourself with some
of the basic principles of expanding your computer.
Tools Required
To install most expansion products in your main system unit,
you will usually need the following tools:
a small/medium “Phillips-type” screwdriver
a small flat-blade screwdriver
General Precautions
In the interests of personal safety and product reliability, you
should review the following information:
Follow all of the instructions and warnings marked on this
product, or included in this manual.
Make sure you have enough room to work on the unit. If
necessary, disconnect any peripheral device cables
connected to the unit’s rear panel.
7-6 Expanding Your System