Filter
Top Products
• To attach the stabilizer
Place the glue (shiny) side of the stabilizer on
the fabric and iron as illustrated using medium
temperature.
(_) Stabilizer
(_) Fabric
®
• To set the Fabric in the Embroidery Hoop
• Mark the desired embroidering position on the
fabric as illustrated using tailors chalk.
(_) Fabric
(_) Reference lines
Place the template on the fabric, matching the
reference lines located on the template to the
reference lines you previously marked on the
fabric.
Tape the template to the fabric as shown to hold
the template in place. (Transparent tape is
recommended.)
(_) Tape
(_) Template
Place the fabric with the template attached to it
on top of the outer hoop.
Set the inner hoop on top of the fabric.
(_) Inner hoop
(_) Right side of fabric
(_ Stabilizer on wrong side of fabric
(_ Outer hoop
Push the flat side of the inner hoop " A" into the
flat side of the outer hoop " B ".
While squeezing the handles " C " together push
the round part of the inner hoop into the round
part of the outer hoop so the material is secure.
Remove the template by putting your finger in
the thumb hole located on the template and lift
up.
_) For easy removal of template (thumb hole)
A
72