Filter
Top Products
SECTION IV PROFESSIONAL STYLE EMBROIDERY
Getting Ready to Sew Professional Style
Embroidery
• Stabilizer
Stabilizer for embroidery is available in a variety of
types and weights.
Stabilizer should be attached to the wrong side of
fabric. (Mote than one layer may be required.)
The non-adhesive stabilizer should be used with fabric
which cannot be ironed or on sections which are
difficult to iron. For both types, cut the stabilizer larger
than the embroidery frame and set it on the flame so
that the entire piece is fastened in it.
Selection of stabilizer:
To obtain perfectly formed letters, it is important to
use the correct stabilizer:
* Adhesive type (iron-on) .......... Use for stretch
fabric, thin fabric
and shrinkable
fabric.
* Non-adhesive type ................. Use for firm
fabrics and fabrics
which cannot be
ironed.
Note:
In embroidery sewing, the foot control is not used.
Use the start/stop button.
• Sdectlng Needle and Thread
f
WEIGHT TYPE TYPE NEEDLE _
OF OF OF I SIZE
FABRIC THREAD NEEDLE
Size 50 Universal
Light Machine Ball Point 11 (75)
Medium Embroidery Blue Needle
Thread
Size 50 to
Heavy 100 Universal 14 (90)
Synthetic
* For embroidery sewing, we recommend good quality
machine embroidery thread.
• Template
The illustration shows various starting points.
(L) Starting point for opdonal Memory Cards K-letc.
(_) Starting point for optional Memory Cards K-101,
102 etc.
(_) Starting point for Monogramming (see page 72).
@ Thumb hole (see page 72).
66