Filter
Top Products
WhenMessages Appear on the Screen
The visual touch screen shows "Bobbin winding".
After the bobbin is wound, return the bobbin winder to
its original position by moving the spindle to the left.
Raise the needle bar by pressing the up/down needle
button. (This message will appear when the power
switch is turned on and the needle is lowered.)
Turn off the power switch, and insert the Memory
Card again.
Stop operating the machine until this message
disappears (about I5 seconds).
(When the machine is over-loaded.)
ContactyournearestSears Store.
Use foot control,
PRESS THIS BUTTON "_"
TO RAISE NEEDLE BAR
TURN OFF AND
INSERT CARD
STOP FOR SAFETY PURPOSES
SYSTEM ERROR
USE FOOT CONTROL
1
114