Filter
Top Products
SECTION III CONVENTIONAL SEWING
Selecting Patterns (Conventional Sewing)
• Changing the visual touch screen
I
• When the power switch is turned on, the menu
screen is displayed.
• When the _ key is pressed, Screen (_) is
displayed.
• When the [_] key is pressed, Screen (_) is
displayed.
• When the {_ key is pressed again, Screen (_{)is
displayed.
• When the [_ key is pressed, Screen (_) is
displayed.
• When the [_ key is pressed again, Screen (_) is
displayed.
When the [_ key (return key) or the _ key is
pressed, the menu screen is displayed.
Note:
In conventional sewing, the start/stop button
cannot be used, Please use the foot control.
• Selecting Patterns
Press the center of a desired pattern on the screen.
07) Appropriate needle thread tension is displayed.
(_) A suitable foot isdisplayed.
(_) Sdtch Width and Length Key:
When the _ key is pressed, the stitch width
and length can be adjusted (see page 40).
(_) Up/Down Needle Position Key : [_
When this key is pressed, the needle bar alternates
between up and down positions when the machine
stops (see page 30).
CAUTION:
* Do not press the surface of the visual touch
screen with hard or sharp objects like pencils
or screw drivers.
When you select a pattern or function on the
screen, it is not necessary to press hard; just
touch the keys with your finger.
Use a dry soft cloth to wipe offthe screen.
(_ Visual touch screen
t
°
@@ @@
f
"1
28