Filter
Top Products
Zipper Sewing [_]
Choose Stitch Pattern 1 and attach Foot E.
(1")E: Zipper foot
• To Snap On the Zipper Foot
lair the pin on the zippcr foot into the groove on the
foot holder.
To sew the left side of the zipper, attach tile zipper
foot with the right side of the pin locked to the
foot holder.
To sew the right side of the zipper, attach the
zipper foot with the [eft side of the pin locked to
the foot holder.
(_) Groove
Pin
(_) When the left side is sewn.
(_ When the right side is sewn.
• Fabric Preparation
Add 1 cm (3/8 ") to the zipper size. This is the overall
opening size.
@ Right side of fabric
@ Opening size
@ Zipper size
@ I cm (3/8")
(_) End ofopening
_) Slider
(_) Zipperteeth
(_) Zipper tape
Place right sides of fabric together and sew to the end of
the zipper opening. Reverse stitch to lock the stitches.
Manually increase the stitch length to 4.5 and set the
needle tension at 0, and sew the zipper opening.
(_) 4.5(Basting Stitch)
End of opening
@ Straight Stitch
(_ 2 cm (3/4")
1_) Reverse stitch
®
• To Sew
Fold back the left seam allowance. Turn under the
right seam allowance to form a 0.2 to 0.3 cm (1/8 ")
fold. Place the zipper teeth next to this fold and
pin in place.
Attach the zipper foot with the pin on the right
hand side.
Lower the zipper foot on the top side at the bottom
of the zipper so that the needle pierces the fabric
next to the fold and the zipper tape.
(]) Fold (_) Opening size
(g) 0.3 cm (1/8 ") (_) Lower fabric
(_) Stitch line (_) Wrong side of fabric
(_) End of opening
52