GE AF-300 Sewing Machine User Manual


 
-
8
-
Preface
Thank you for purchasing our AF-300C11 series drive. This product is used to drive a 3phase electrical
motor at variable speed. Incorrect use of this product may result in personal injury and/or property damage.
Read all operating instructions before using this device. Since this manual does not cover the use of option
boards, etc., refer to relevant manuals for option operations.
These instructions do not purport to cover all details or variations in equipment, nor to provide for every pos-
sible contingency to be met during installation, operation, and maintenance. Should further information be
desired or should particular problems arise that are not covered sufficiently for the purchaser's purpose, the
matter should be referred to GE Fuji, Technical Service.
NOTE: The terms "inverter". "controller", and "drive are sometimes used interchangeably throughout the in-
dustry. We will use the term "drive" in this document.
AF-300C11 " and XSD" are trademarks of the General Electric Company. Energy Saver is a registered
trademark of the General Electric Company.
NOTE: Always read the complete instructions prior to applying power or troubleshooting the equipment and
follow all procedures step by step.