Filter
Top Products
SYSTEM OVERVIEW
Burglary
Protection
Your system provides four modes of burglary protection: STAY, AWAY, INSTANT and
MAXIMUM, and allows you to BYPASS selected zones while leaving the rest of the
system armed. You must turn on or “arm” the burglary protection portion of your system
before it will sense burglary alarms. The system also provides a CHIME mode, for
alerting users to the opening of doors and windows while the system is disarmed. Refer
to the other sections of this manual for procedures for using these features.
The following table lists the four different arming modes and the results of each.
Arming
Mode
AWAY
. STAY
INSTANT
MAXIMUM
Features For Each Arming Mode
Exit Delay
Entry Delay
Perimeter Armed
Interior Armed
Yes YeS Yes YC?S
Yt?S
Yes
Yes
No
Yes No
Yes
No
YeS No YC?!S Yt3.S
A
Security Codes
At the time of installation, you were assigned a personal four-digit security code, known
only to you. You must enter the security code when arming and disarming the system,
and when performing other system functions. As an additional safety feature, other
users who do not have a need to know your code can be assigned different security
codes. Refer to the SECURITY CODES section for procedures on adding additional
security codes to the system.
-5-