Filter
Top Products
USING SCHEDULES
Programming
Temporary schedules only affect the partition from which it is entered. Temporary
Temporary
Schedules schedules can be reused at later dates simply by scrolling (by pressing #) to the
DAYS? prompt (described below) and activating the appropriate days. This should
be considered when defining daily time windows. Note that only users with authority
level of manager or higher can program temporary schedules.
To program temporary schedules:
1.
Enter your security code.
2.
Press the
q
key followed by 81.
3.
The following prompts will appear.
The cursor will be positioned on the tens of hours digit of
the start time for Monday’s disarm window. Enter the
desired hour. Press
l
to move to the minutes field. The
minutes are entered in the same manner. The AM/PM
indication is changed by hitting any key, O-9, while the
cursor is under the letter A/P position. Repeat for the stop
trme entry. Press the
l
key to move to the arming window
for Monday.
Press # to move to the next screen display without
making changes.
The cursor will be positioned on the tens of hours digit of
the start time for the arm window. Repeat the previous
swt;ro; enter the start and stop time for Monday’s arming
.
- 41 -