Filter
Top Products
General Information Device timers consist of an ON time & an OFF time, and selected days of the week in which
they are active. There are up to 20 timers that can be used to control various devices, such
as lights or appliances. Your installer will have programmed the appropriate devices into the
system (up to 16 devices can be programmed).
Each timer controls a single device (designated as an output number) that you select. For
example, timer 1 might be set to turn the porch lights on at 7:OOpm and turn them off at
11:OOpm. Timer 2 might turn on the air conditioner Monday-Friday at 4:30pm to cool the
premises before you arrive at 5:00pm, and turn it off at 1O:OOpm when you are retiring for
the night. If desired, different timers can control the same device. For example, timer 2
could be used Monday-Friday as in the previous example, and timer 3 could be set to turn
the air conditioner on and off at different times on Saturday and Sunday.
To enter the device timer menu mode:
Enter your security code, then press the [#I
key followed by 83.
See your installer for device
numbers.
Up to 20 timers can be programmed. Each timer is identified by a
number l-20. Enter the desired timer number to be pro-
grammed (l-20).
Press * to accept entry.
If that timer number has already been programmed, a summary
screen will appear. In this example:
06 = Timer #; 04 = Output Device # affected by this timer
PORCH LITE = Output Descriptor for Device # 4
07:00PM = Start Time; 11:45PM = Stop Time
Press * to continue.
Enter the desired output device number (01-l 6). As the number
is entered, the device’s description will appear.
To delete a previously programmed timer, enter 00 as the output
number.
- 43 -