Filter
Top Products
PROGRAMMING DEVICE TIMERS
I
00 Permanent ?
O=NO,l =YESO
I
Enter the time you want the device turned on using 0O:Ol -
1159 format. When the display shows the desired time, press
the * key to move to the AM/PM field. Press any key O-9 to
change the AM/PM indication.
Enter 0O:OO if this timer is not being used to turn something ON
for the days selected below. (ex. using one timer to turn lights on
one day and using another timer to turn them off on another day).
Enter the time you want the device turned off using 0O:Ol -
1159 format. When the display shows the desired time, press
the $ key to move to the AM/PM field. Press any key O-9 to
change the AM/PM indication.
Enter 0O:OO if this timer is not being used to turn something OFF
for the days selected below. (ex. using one timer to turn lights on
one day and using another timer to turn them off on another day).
Select the days on which the device is to be activated by enter-
ing l-7 (Monday =l). An ‘x” will appear under that day, indicating
the output for that day is active. Entering a day’s number again
will deactivate that day. Pressing 0 will turn all days on/off. The
outputs will only be in effect for the days which have the letter x
underneath them. As the week progresses, the selected days
are reset to the deactive state, unless the permanent option is
selected (next screen prompt). When completed, press $ to
continue.
Answering 1 (yes) means the system will continue executing this
timer on a continuous basis. An answer of 0 means execute each
day’s output only once.
- 44 -