Filter
Top Products
Delaying the Closing Your system’s programmed schedules may automatically arm the system at a
Time predetermined time. In the event a user must stay on the premises later than usual,
users with master or manager authority levels can manually delay the automatic
arming (dosing) time up to 2 hours.
To delay the closing time
1. Enter your security code (master or manager authority levels only).
2. Press the B key, followed by 82.
3. A menu prompt will be displayed, asking for the number of hours of delay.
-1
Enter the desired number of hours of delay, 1 or 2. The
system will automatically exit this mode after entry.
Note that the delay is from the scheduled closing time, not from the time the
command is entered.
Important: The selected delay cannot be reduced once it is set. A l-hour
delay can be increased to 2 hours, though.
4. The system will automatically send a message to the central station informing
them that the programmed schedule has been changed.
- 39 -