Filter
Top Products
SECURITY CODES & AUTHORITY LEVELS
Authority Levels Authority levels define the system functions a particular user can perform. Depending on
the authority assigned to you, there are certain system functions you may be prohibited
from performing. In summary, there are six authority levels, each having certain system
restrictions as shown below.
Level 1 Master: Can perform all system functions in assigned partitions, and
can add, delete or change Manager and Operator level users.
Master codes are added by the Installer.
Can perform system functions in assigned partitions, and can
add, delete or change Operator level users.
Can perform system functions in assigned partitions, but
cannot add or delete other users.
Level 2 Manager:
Level 3 Operator A:
Level 4 Operator B:
Level 5 Operator C:
Level 6 Duress:
Same as Operator A, except Operator B cannot bypass
zones of protection.
Can arm the system in assigned partitions, but cannot disarm the
system unless the system was armed with this code. This code
is typically assigned to someone who has a need to arm/disarm
the system only at certain times (such as a baby-sitter).
Can arm and disarm the system, but also sends a silent panic
alarm to the central station, if that service is connected.
To view your authority level and system capabilities:
1. Enteryourcode+m +/tl.
The keypad will display the partition(s) that you are authorized to operate, and your
user number and authority level in each partition.
-34-