Filter
Top Products
Uslng the
q
Before arming your system, all protected doors, windows and other protection zones
READY Key
must be closed or bypassed (see BYPASSING section). Otherwise the keypad will
display a “Not Ready’ message. Using the READY key will display all zones that are
faulted, making it easier for you to secure any open zones.
To show faulted zones:
I
DIsRRI1ED - PRESS
I
Note: Some keypads light a green LED when the system
* TO SHU6lFRLll rs is readv. If not lit, the svstem is not ready to be armed.
READY
1. Do not enter security code, but simply press
q
.
I
FRULT OS FROM
UPSTRIRS BEDROopl
I
Typical fault display
Secure or bypass the zones displayed before arming the
system. The “Ready’ message will be displayedt when all
protection zones have been either closed or bypassed.
t NOTE: All or part of this message may be replaced by a customized
message programmed by the installer. Bear this in mind
whenever the instructions indicate that the ‘DISARMED’ or
‘READY” message will be displayed.
- 14 -