Filter
Top Products
SPECIAL SYSTEM FUNCTIONS
(GOT0 Command and Global Arming)
Accessing
Another
Each keypad is assigned a default partition for display purposes, and will show only
Partition
that partition’s information. But, if the user is authorized, a keypad in one partition can be
used to perform system functions in other partitions by using the GOT0 command. Note
that only those partitions authorized and programmed by the installer can be accessad
in this manner.
To GOT0 another partition:
READY
1.
Enter your security code, then press
q
+ partition number (O-8).
Entering partition number 0 will return the keypad to its original partition.
The keypad wilj remain in the new partition until directed to
or until 2 minutes has elapsed with
AAAA = alpha descriptor programmed by the installer
X = partition number
Global Arming
The Global Arming option may have been programmed for use by some users. If Global
Arming was enabled for use with your security code, a keypad prompt (message) will
appear after pressing one of the arming function keys (STAY, INSTANT, AWAY,
MAXIMUM, OFF). Follow the keypad prompts to continue arming the system. See your
installer for detailed instructions on the use of this feature.
If global arming does not apply to your security code, use the arming procedures
described on pages 16 to 19.
- 31 -