Filter
Top Products
BYPASSING PROTECTION
ZONES
Using the 1
This key is used when you want to arm your system with one or more zones
BYPASS Key
intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm
when violated while your system is armed. All bypasses are removed when an OFF
sequence (security code plus OFF) is performed. Bypasses are also removed if the
arming procedure that follows the bypass command is not successful.
Note: The system will not allow fire or emergency zones to be bypassed.
To bypass zones, the system must be disarmed first.
BYPASS
1. Enter your security code and press
1 .
2. Enter zone number(s) for the zones to be bypassed (e.g., 01,02,03, etc.).
Important! All single-digit numbers must be preceded by a zero (for example,
enter 01 for zone 1).
Typical bypass message
4- UISRRREU BYPRSS
II
When finished, the keypad will display the word BYPASS
along with each bypassed zone number. Wait for these
zones to be displayed before arming. Arming the system
before bypassed zones are displayed eliminates all
bypasses.
Arm the system as usual when the keypad displays the
“ready to arm” message.
- 21 -