Filter
Top Products
Using the
cl
5 TEST Key
TESTING THE SYSTEM
(TO BE CONDUCTED WEEKLY)
The TEST key puts your system into Test mode, which allows each protection point to
be checked for proper operation.
Disarm the system and close all protected windows, doors, etc. READY should be
displayed.
TEST
Enter your security code and press the
151 key.
The external sounder should sound for 3 seconds and then turn off.
If the sounder
does not sound, it may be due to dialer communication activity. Wait a few minutes
and try again. If the sounder still does not sound, CALL FOR SERVICE
IMMEDIATELY.
The keypad will sound a single beep every 15 seconds as a reminder that the
system is in Test mode. Each time a protection zone is faulted (opened), the keypad
should beep three times. If the sounder does not sound, CALL FOR SERVICE
IMMEDIATELY.
Note that no alarm reports will be sent to the central monitoring station while
the system is in the lest mode.
(Ctmtinoed)
- 27 -