Filter
Top Products
7. SEWING
RH-981A
52
7-9. Changing the mode during an operation
• If you press the SELECT key (1) during test feeding,
you can change the mode to manual sewing in
manual sewing mode.
• If you press the SELECT key (1) while pressing and
holding the ENTER key (2) during test feeding, you
can change the mode to resewing enabled in
automatic sewing mode.
• If you press the SELECT key (1) during manual
sewing mode, you can change the mode to test
feeding in test feeding mode.
• If you press the SELECT key (1) while pressing and
holding the ENTER key (2) during manual sewing,
you can change the mode to resewing enabled in
automatic sewing mode.
7-10. Moving the cloth feed bar (-52 specifications)
While pressing the RESET key (1), press the key
or the key.
The cloth feed bar will then move in the right direction
or the left direction.
* This operation is only possible when the cloth feed
plate is in the left setting position (home condition).
3068Q
3067Q