Filter
Top Products
3. INSTALLATION
RH-981A
23
3-17-6. Connecting the air tubes
Connect air tubes [50], [51], [52] and [53] to the places
with the corresponding numbers on the valve unit.
Label No. Solenoid valve type
[50], [51] For cloth feed drive cylinder
[52] For chucking cylinder
[53] For holding cylinder
3-17-7. Securing the air tubes and cables
1. Remove the screw (length 8 mm) (1).
2. Secure the air tube (2) and cable (3) with the cord holder (4), screw (length 16 mm) (5) and washer (6).
* Leave enough slack in the air tube (2) and cable (3) at this time to allow for the movement of the feed bracket
(7).
0855Q
0856Q
3026Q