Filter
Top Products
2. SPECIFICATIONS
RH-981A
3
2-2. Sewing shape
Eyelet buttonhole Straight buttonhole
Without bar
tacking
With taper With straight bar
tacking (*)
Without bar
tacking
With taper With straight bar
tacking (*)
* The DIP switch settings must be changed. (Refer to page 74.)
2-3. Optional parts
Parts name Parts code
Two-pedal foot switch S42838-101
This allows the work clamp to raised and lowered and the
sewing machine to be started by pedal operation.
Waist belt presser
Cloth presser (L3W) set
Cloth presser (L4W) set
S43701-001
S43704-001
When sewing eyelet buttonholes into waist belts with which
have differences in thickness, this presser provides secure
clamping for the different thickness. It prevents any slippage
of the material during sewing.
Upper thread nipper
S43406-301
This device prevents the thread from pulling out at the sewing
start, thus contributing to a more accurate and higher-quality
seam finish.
Fly indexer
Fly indexer assembly for L1, L2
and L5 specifications
Fly indexer assembly for L3, L4,
L6 and L7 specifications
S44279-101
S44281-101
This is an indexer which is specially for use when sewing flys.
It allows from one to nine buttonholes to be set, and
automatically feeds the material. Using this device makes the
sewing of buttonholes for flys much quicker.
Special lapel cutting device
S53906-201
Eyelet buttonhole and straight buttonhole can be sewn
automatically without replacing hammer and knife. It is
effective for men’s jacket cycle sewing (eyelet buttonhole-
flower hole).
2-4. PD-9810, Programmer
You can use the icon keys to retrieve parameters at a
single touch, and to display them as icons on the LED
screen so that the settings can be changed easily. It
allows you to easily transfer data between different
sewing machines.
2381
Q