Filter
Top Products
5. CORRECT USE
RH-981A
31
5-7. Setting the material
<-00, -01, -02 specifications>
1. Insert the material so that it touches the right and left cloth guides (1).
2. The sewing margin can be adjusted to within 10 - 30 mm.
3. Loosen the screws (2) at left and right and move the cloth guides (1) back and forth to adjust the sewing margin.
<-52 specifications>
1. Place the material (fly) on top of the feed bracket (1), and then feed the material (fly) in until it reaches horizontal
cloth set guide (L) (2) and horizontal cloth set guide (R) (3).
* Check that the right edge of the material (fly) is straight against the left edge of the vertical cloth set guide (4) at
this time.
2. The vertical sewing margin can be adjusted between 9 - 21 mm for L1 - L4 and 9 - 11 mm for L5 - L7.
Loosen the four screws (5), and then move horizontal cloth set guide (L) (2) and horizontal cloth set guide (R) (3)
forward or back to adjust.
3. The horizontal sewing margin can be adjusted between 30 - 40 mm.
Loosen the two screws (6), and move the vertical cloth set guide (4) to the left or right to adjust.
3042Q
3043Q
10 - 30 mm
3044Q
0892Q
9 - 21 mm for
L1 - L4
9 - 11 mm for
L5 - L7
30 - 40 mm