Filter
Top Products
6. OPERATION
RH-981A
41
No. Setting items Setting range Unit Default
08 Knife X position compensation -0.5 - 0.5 mm 0.1 0
09 Knife Y position compensation -0.7 - 0.7 mm 0.1 0
10 Start tying stitches 0 - 2 stitches 1 0
11 End tying stitches 0 - 2 stitches 1 0
12 X alignment -1 - 6 1 0
13 Y alignment -1 - 6 1 0
14
θ1 alignment
-3 - 3 1 0
15
θ2 alignment
-3 - 3 1 0
16 Eyelet machine speed (*2) -600 - 0 rpm 100 0
*2 The standard eyelet machine speed is the value that has been set by parameter 00 (sewing speed).