Filter
Top Products
3. INSTALLATION
RH-981A
20
3-17. Installing the indexer (option)
3-17-1. Installing the indexer main unit
1. After disconnecting air tubes [20] and [21], insert the
two plugs (3) into joints (1) and (2). In addition,
remove parts (4), (5) and (6) indicated in the
illustration.
2. Remove the screws (7) from feed bracket cover (L)
(8), and then install feed base (L) (9).
3. Remove the screws (10) from feed bracket cover
(R) (11), and then install feed base (R) (12).
4. Pass the cloth feed bar (13) between the rollers of
feed bar guide (R) (14) and feed bar guide (L) (15),
and place it on top of feed base (L) (9) and feed
base (R) (12).
* Push down the chuck pin (16) and check that it
goes smoothly into all of the holes in the cloth
feed bar (13).
If it does not go in smoothly, re-adjust the
installation positions of feed base (L) (9) and feed
base (R) (12).
3015Q
3016Q
3017Q
3018Q