Filter
Top Products
3. INSTALLATION
RH-981A
5
3. INSTALLATION
CAUTION
Machine installation should only be carried out
by a qualified technician.
Contact your Brother dealer or a qualified
electrician for any electrical work that may need to
be done.
The sewing machine weighs more than 87 kg.
The installation should be carried out by two or
more people.
Do not connect the power cord until installation
is complete, otherwise the machine may
operate if the start switch is pressed by mistake,
which could result in injury.
All cords should be secured at least 25 mm
away from any moving parts.
Furthermore, do not excessively bend the cords
or secure them too firmly staples, otherwise
there is the danger that fire or electric shocks
could occur.
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
Install the belt covers to the machine head and
motor.
3-1. Table processing diagram
The top of the table should be 50 mm in thickness and should be strong enough to hold the weight and withstand the
vibration of the sewing machine. Drill holes in the table as shown in the diagram below.
* There is the special table indicated below.
Model code
Table/legs assembly 127-981-04902
0800Q