Filter
Top Products
6. OPERATION
RH-981A
39
No. Setting items Setting range Unit Default
13 Y alignment -1 - 6 1 0
14
θ1 alignment
-3 - 3 1 0
15
θ2 alignment
-3 - 3 1 0
16 Eyelet machine speed (*2) -600 - 0 rpm 100 0
17 Eyelet radius OFF, 1 - 5 1 OFF
18 Taper tact radius OFF, 1 - 5 1 OFF
19 Taper tact angle -5 - 5 1 0
20 Slow start stitches 0 - 3 stitches 1 0
21 Slow start speed (*3) 400 - 1,500 rpm 100 1,000
22 Stitch width correction -1.0 - 1.0 mm 0.1 0
29 Program copy OFF, 1 - 9
(Specify copy source)
1OFF
*2 The standard eyelet machine speed is the value that has been set by parameter 00 (sewing speed).
*3 If the sewing speed is set to a speed that is slower than the slow start speed, the slow start speed used for
sewing will be the same as the normal sewing speed.