Filter
Top Products
7. SEWING
RH-981A
46
7-2. Using the EMERGENCY STOP switch
1. Press the EMERGENCY STOP switch (1).
* All sewing operations will stop and the buzzer will sound. At this time, the warning indicator (2) will flash and
"E-60" will flash in the detail display (3).
* If the upper shaft could not stop in the needle up stop position, "E-10" will flash in the detail display (3). In this
case, turn the upper shaft pulley by hand to set the upper shaft to the needle up stop position. (Align the
marks.)
2. Eliminate the cause of the problem.
3. Release the EMERGENCY STOP switch (1).
4. In automatic mode:
• If continuing on with sewing, press the and keys to determine the position to resume sewing from. Then
press the start switch (4). (Sewing will then restart.)
Note: The start switch (4) will not work unless you not press the key at least once.
• To stop sewing, press the RESET key (5). (The feed bracket will return to the cloth setting position.)
In test feed mode or in manual mode:
• Press the RESET key (5). (The feed bracket will return to the cloth setting position.)
3139Q
3140Q
3058Q