Filter
Top Products
5. CORRECT USE
RH-981A
32
Cloth setting position
The sewing start position can be set to either the left setting position or the horizontal setting position. (Refer to page
73.)
When set to the left setting position
This is the normal setting position for the cloth.
* After the last buttonhole is sewn, the cloth feed bar returns to the left setting position.
Horizontal setting position
The cloth is set to both the left setting position and right setting position.
* The next piece of cloth is set at the position that the last buttonhole was sewn.
0893Q
Left setting position
0894Q
Right setting position