Filter
Top Products
ICP-CC488 | Installation Guide | 5.0 System Functions EN | 29
Bosch Security Systems, Inc. | 12/08 | F01U089457-02
Table 29: Domestic Dialing Digits
Digit
Required
Number to
Program
Digit
Required
Number to
Program
0 0 8 8
1 1 9 9
2 2
3 3 * [STAY]1
4 4 # [STAY]2
5 5 4 sec pause [STAY]3
6 6 break [STAY]4
7 7 15 [STAY]5
Example
If you want to program two separate telephone
numbers (9672 1777 and 9672 1233), enter:
[2 5 8 0
2][AWAY][9 6 7 2 1 7 7 7][STAY]
[4 9 6 7 2 1 2 3 3][[AWAY]
To disable domestic dialing:
Enter your Master Code and press [2][AWAY]
[STAY][4][AWAY].
Table 30: Codepad Indicators When Changing
Domestic Telephone Numbers
Zone Indicators MAINS
Digit 1 2 3 4 5 6 7 8 Indicator
0 X
1 X
2 X
3 X
4 X
5 X
6 X
7 X
8 X
9 X X
* X X
# X X
Pause X X
Break X X
5.2.5 Change Telco Arm/Disarm Sequence
This feature allows you to program the telco arm
sequence and telco disarm sequence. This feature is
available only if your telecommunication provider
has the call forward option available.
Telco Arm Sequence
This allows you to program the Call Forward –
Immediate On sequence or Call Forward – No
Answer sequence that automatically operates when
you arm the system in the AWAY Mode.
The examples provided for this feature
apply only to Australia.
• Call Forward – Immediate On
You can redirect calls to anywhere in Australia,
including mobiles, pagers, and answering
services. When this Call Forward option is
turned on, your telephone does not ring.
• Call Forward – No Answer
If your telephone is not answered within 20 sec,
this feature redirects the incoming call to another
number anywhere in Australia. You can still
make outgoing calls.
Telco Disarming Sequence
This option allows you to automatically disable the
call forward sequence when you disarm the system.
Table 31: Telco Arm/Disarm Dialing Digits
Digit
Required
Number to
Program
Digit
Required
Number to
Program
0 0 8 8
1 1 9 9
2 2
3 3 * [STAY]1
4 4 # [STAY]2
5 5 4 sec pause [STAY]3
6 6 break [STAY]4
7 7 15 [STAY]5
To program the telco arming sequence:
1. Enter your Master Code and press [3][AWAY].
Three beeps sound and the STAY and AWAY
indicators flash.
2. Press [1][AWAY] to change the telco arming
sequence. Three beeps sound.
If a call forward sequence is already
programmed, the sequence is displayed one digit
at a time using the remote codepad indicators.
Refer to Table 30 on page 29 for the indicators
and their meanings.
If no call forward sequence is programmed, an
additional two beeps sound after entering this
mode. These two beeps normally sound after the
last digit of the call forward sequence is
displayed.
3. Enter the desired call forward sequence.
For example, program [* 6 1][phone number][#]
for the call forward – no answer sequence, or [* 2
1][phone number][#] for the call forward –
immediate sequence.
When you program a * in the telco arm
sequence, enter [STAY][1]. When you
program the # in the telco arm sequence,
enter [STAY][2].