Filter
Top Products
Network Management Card: How to Access a Configured Unit
56 NetworkAIR IR Operation, Maintenance, and Troubleshooting
FTP/SCP
You can use FTP (enabled by default) or Secure CoPy (SCP) to transfer new firmware to the Network
Manager Card, or to access a copy of the System’s event logs. SCP provides the higher security of
encrypted data transmission and is enabled automatically when you enable SSH.
To access the Network Management Card through FTP or SCP, the default user name and password
are apc and apc for an Administrator, or device and apc for a Device Manager. In the command line,
use the IP address of the unit.
Note
If you enable SSL and SSH for their high-security authentication and encryption,
disable FTP. Allowing file transfer to the System through FTP compromises the high
security you implement by choosing SSL and SSH. To disable FTP, you must be an
Administrator; use the FTP Server option of the Network menu.
See the User’s Guide to use FTP or SCP to transfer firmware files to or to retrieve log
file from the Network Management Card.