Filter
Top Products
Operation: Set Up Contacts and Relays
NetworkAIR IR Operation, Maintenance, and Troubleshooting 15
Action. The Action field changes as you scroll through the list of events that can be mapped to this
relay. Remove indicates that the event is already associated with this relay. Add indicates that the
event is not associated with this relay. Press the
ENTER key and change the setting to map the
displayed event to this relay or remove the displayed event from the list of events mapped to this
relay.
Normal. Set the normal state for this relay. If the state of an alarm or event mapped to this relay
changes from the normal state, the relay also changes state.
Reset Mappings. Set all of the output mappings back to their default settings.