Filter
Top Products
Operation: Set Up Group
30 NetworkAIR IR Operation, Maintenance, and Troubleshooting
Configure the list of System Failure Events. If a System failure event occurs, the System in which it
occurs transitions to the failed state, and a backup System is engaged if available.
Event. Scroll through the list of possible failure events. The first line indicates whether the event is
System-level or Module-level, and the second line indicates the event text.
State. Set each event to Enabled or Disabled. If an enabled event occurs in a System, that System
transitions to the failed state and stops running, unless there is no backup System available to come
online.
Note
The System Failure Events must be configured at each System in the Group. Unlike
other Group settings, the System Failure Events list is not copied to each System in the
Group.