6-1
The 4100U-S1 can support one IDNet card in the expansion bay, to provide a second
addressable loop.
The IDNet Card uses Mapnet Protocol and communicates with existing Mapnet
detectors/devices plus the new IDNet devices.
Refer to the page number listed in this table for information on a specific topic.
Topic See Page #
The IDNet Card
6-2
Installing the IDNet Card onto the PDI
6-4
Configuring the Card
6-5
Wiring to IDNet Devices
6-6
Troubleshooting on IDNet
6-9
Chapter 6
Installing a 4100U IDNet Card
Introduction
In this Chapter