Filter
Top Products
APPENDIX A-2: Setup Variables For Serial I/O Teledyne API - T300/T300M and M300E/EM PN 04906H (DCN5840)
A-8
APPENDIX A-2: Setup Variables For Serial I/O
Table A-1: T300/T300M and M300E/EM Setup Variables, Revision L.8
Setup Variable Numeric
Units
Default
Value
Value
Range
Description
Low Access Level Setup Variables (818 password)
DAS_HOLD_OFF Minutes 15 0.5–20 Duration of DAS hold off period.
CONC_PRECISION — 3 AUTO,
0,
1,
2,
3,
4
Number of digits to display to the
right of the decimal point for
concentrations on the display.
REM_CAL_DURATION
17
Minutes 20 1–120
Duration of automatic calibration
initiated from TAI protocol.
STABIL_GAS — CO
0
CO,
CO2
10
,
O2
14
Selects gas for stability
measurement.
DYN_ZERO — OFF ON, OFF
ON enables remote dynamic
zero calibration; OFF disables it.
DYN_SPAN — OFF ON, OFF
ON enables remote dynamic
span calibration; OFF disables it.
CLOCK_ADJ Sec./Day 0 -60–60
Time-of-day clock speed
adjustment.
Medium Access Level Setup Variables (929 password)
LANGUAGE_SELECT — ENGL
0
ENGL,
SECD,
EXTN
Selects the language to use for
the user interface.
MAINT_TIMEOUT Hours 2 0.1–100
Time until automatically
switching out of software-
controlled maintenance mode.
CONV_TIME — 33 MS
0
33 MS,
66 MS,
133 MS,
266 MS,
533 MS,
1 SEC,
2 SEC
Conversion time for
measure/reference detector
channel.
CO_DWELL Seconds 0.2 0.1–30
Dwell time before taking
measure or reference sample.
CO_SAMPLE Samples 1 1–30
Number of samples to take in
measure or reference mode.
PRE_FILT_SIZE
5, 19
Samples 16 1–50 Moving average pre-filter size.
FILT_SIZE Samples 750,
720
9, 12
200
3, 8
1000
19, 23
1–1000 Moving average filter size.
04188D DCN5752