Filter
Top Products
Advanced Features Teledyne API – Technical Manual - Model 300E Family CO Analyzers
142
7.4.4. TURNING AN ANALOG OUTPUT OVER-RANGE FEATURE ON/OFF
In its default configuration, a ± 5% over-range is available on each of the M300E/EM Analyzer’s analog outputs.
This over-range can be disabled if your recording device is sensitive to excess voltage or current.
To turn the over-range feature on or off, select the ANALOG I/O CONFIGURATION submenu (see Figure 7-4)
then pres
s:
04288D DCN5752