Singer 4220 Sewing Machine User Manual


 
Important Safety Instructions
HOW TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR PERSONALDAMAGE,
WHEN USING AN ELECTRICAL APPLIANCE, BASICSAFETY PRECAUTIONS SHOULD ALWAYS
BEFOLLOWED, INCLUDING THE FOLLOWING:
READALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
This machine has been designed for domestic
use.
This machine should never be plugged in
while NOT in use. ALways unplug the
machine from the electric outlet before
cleaning or after using it.
Before switching on the machine, make
sure that the electric voltage of the socket
outlet is the same as the rated voltage.
Use this machine only for its intended use as
described in this Instruction Book. Use only
attachments specifically recommended for
the machine.
Disconnect the power-Une plug from the
socket outlet or switch the machine off when
making any adjustments in the needle area,
such as threading a needle, changing a
needle, changing the needle plate, changing
presser foot or removing bobbin case, etc.
ALways unplug the machine from the
electrical outlet before removing covers,
Lubricating or when making any other
adjustments mentioned in this Instruction
Book.
Do not unplug by pulling on cord. To unplug,
grasp the plug, not the cord.
Do not attempt to adjust the motor belt.
Contact your nearest authorized SINGER
Service Center should any adjustment be
required.
If the LED Luminaire isdamaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in
order to avoid a hazard.
When sewing, keep fingers away from
all moving parts. Special care is
required to avoid accidents with
needle while in movement.
Do not pull or push fabric firmly white
stitching. It may deflect the needle
causing it to break.
Never operate the machine with any
air openings blocked. Keep
ventilation openings of the machine
and foot control pedal free from the
accumulation of lint and dust.
Do not operate where aerosol(spray)
products are being used or where
oxygen isbeingadministered.
The appliance is not intended for use
by young children or infirmed persons
without supervision.
If the supply cord is damaged, it must
be replaced by the manufacturer or
its service agent or a similarly
qualified person in order to avoid a
hazard..
Do not use outdoors.
Do not use bent needle.
AILways use the proper needle plate.
The wrong plate, can cause the
needle breaks.
Switch off or unplug the appliance
when leavingitunattended.
SAVE THESE INSTRUCTIONS.
6 __