Filter
Top Products
6 Pelco Manual C543M-A (7/03)
1.3 UNPACKING INSTRUCTIONS
Unpack and inspect all parts carefully.
The matrix bay you receive should be populated with all the boards and associated
cables needed for your particular installation. In addition, jumper settings, board
installation locations specific to your order should already be completed.
Be sure to save the shipping box and any packing material, at least until it has been
determined that the equipment you have received is working properly. It is best to
keep the material anyway in case future problems warrant return of any equipment.
If an item has been damaged in shipment, replace it in its box and contact the
factory at 1-800-289-9100 or 1-559-292-1981. (International customers fax 1-559-
348-1120 for authorization and instructions.)
If an item needs to be returned to the factory for repair, consult the WARRANTY
AND RETURN section of this manual for instructions.
1.4 RECOMMENDED TOOLS
Pelco does not supply basic tools for the installation process. The following tools,
however, may be needed to install the product depending on your installation
geometry:
Crimp tools
Wire stripper
Straight and Phillips screwdrivers
Coaxial cable stripper
Wire cutter
BNC crimp tool